砂岩方梁断裂过程区范围的实验确定方法

裂纹前端的断裂过程区是引起岩石非线性断裂及尺寸效应的主要原因。利用数字图像相关技术对砂岩开展了三点弯曲梁实验,获得观测区域高精度的全场位移和应变数据,根据断裂韧带区域水平位移和水平应变的分布特征,结合裂尖岩石颗粒变化的微观分析,提出采用裂纹尖端水平位移波动性和水平应变突变性所得到的波动系数和水平应变突变值,确定断裂过程区形状和临界尺寸的方法。结果表明:砂岩断裂过程区的形状为不规则的狭长带状区域,断裂过程区的临界长度为11~13mm,临界宽度为1.58~2.36mm。断裂过程区区域内形变在趋向裂尖时呈指数增加,但其单位区域内的形变增量呈波动状态。该方法能够更加准确判断岩石断裂过程区的范围,有助于分析岩石的非线性断裂特性。     

Facile non‐lithographic route to highly aligned silica nanopatterns using unidirectionally aligned polystyrene‐block‐polydimethylsiloxane films

Thin films (monolayer and bilayer) of cylinder forming polystyrene‐block‐polydimethylsiloxane (PS‐b‐PDMS) were shear aligned by the swelling and deswelling of a crosslinked PDMS pad that was physically adhered to the film during solvent vapor annealing. The nanostructures formed by self‐assembly were exposed to ultraviolet‐ozone to partially oxidize the PDMS, followed by calcination in air at 500 °C. In this process, the PS segments were fully decomposed, while the PDMS yielded silica nanostructures. The highly aligned PDMS cylinders were thus deposited as silica nanolines on the silicon substrate. Using a bilayer film, the center‐to‐center distance of these features were effectively halved from 38 to 19 nm. Similarly, by sequential shear‐alignment of two distinct layers, a rhombic array of silica nanolines was fabricated. This methodology provides a facile route to fabricating complex topographically patterned nanostructures. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1058–1064     

Measurement of Residual Dipolar Couplings of Organic Molecules in Multiple Solvent Systems Using a Liquid-Crystalline-Based Medium

Residual dipolar coupling (RDC), a robust anisotropic NMR parameter for structural elucidation of organic molecules, is only accessible in an anisotropic environment. Herein, we introduce a novel alignment medium based on the molecular self-assembly of oligopeptide amphiphile (OPA). This medium is compatible with different intermediate and polar solvent systems, such as CD₃OD, [D₆]DMSO, and D₂O. The preparation of the OPA-based medium is simple and rapid, while only very weak background signals were observed from OPAs. Furthermore, we show that the purity of OPA has only a minor influence on the quality of the RDC data. These advantages allow RDC measurements of organic molecules with different polarities and solubilities with high efficiency and accuracy.     

基于几何不变量的蛋白质三维分子结构比对

为了解决蛋白质三维结构比对需要处理大量的旋转、平移变换，直接用动态规划将变得十分繁琐这一问题，在保留蛋白质空间结构属性特征的基础上，对蛋白质三维数据进行了预先的处理．通过计算蛋白质结构在旋转和平移下的几何不变量，将蛋白质的三维结构坐标变换为具有旋转、平移不变性的一维序列．进一步给出了“距离”以及“相似得分”的定义．在此基础上采用动态规划方法给出了新的蛋白质结构比对算法．对专家分类的蛋白质结构数据库进行测试，结果显示准确、快速．     

Tokamak中自举电流的剖面准直性

利用Harris模型,通过求解等离子体平衡方程,计算俘获粒子份额,分别对常规剪切和中心负剪切下tokamak中的自举电流的大小和剖面准直性进行了计算和分析.自举电流分布与等离子体平衡电流分布之间的剖面准直性可以通过调整等离子体的密度、温度和电流分布参数,以及描述等离子体形状的拉长度k和三角变形因子d来获得.中心负剪切位形有利于自举电流产生,并有好的剖面准直性.通过计算比较,分别在常规剪切位形下和中心负剪切位形下获得了一组优化的等离子体参数,在这组参数下,自举电流有较大的份额和好的剖面准直性 关键词： tokamak 自举电流 剖面准直性     

Parametric multiple sequence alignment and phylogeny construction

Bounds are given on the size of the parameter-space decomposition induced by multiple sequence alignment problems where phylogenetic information may be given or inferred. It is shown that many of the usual formulations of these problems fall within the same integer parametric framework, implying that the number of distinct optima obtained as the parameters are varied across their ranges is polynomially bounded in the length and number of sequences.     

A surface-mounted device assembly technique for small optics based on laser reflow soldering

The three-dimensional miniaturized optical surface-mounted device (TRIMO-SMD) is a new flexible and automated assembly technique for small optical components (maximum diameter for a lens is 2 mm) based on laser reflow soldering technique. This technology can be compared to the electronic SMD technique but applied to micro-optical devices. We present some recent developments of TRIMO-SMD in its application to industrial products.     

压印光刻中的两步对正技术

压印光刻中套刻需要粗、精两级对正.实验采用一对斜纹结构光栅作为对正标记.利用物镜组观察光栅标记图像的边界特征进行粗对正,其准确度在精对正信号的捕捉范围内；利用光电接收器件阵列组合接收光栅莫尔信号，在莫尔信号的线区进行精对正.由于线性区的斜率大, 精对正过程中得到相应x,y方向的对正误差信号灵敏度高,利用高灵敏度对正误差信号作为控制系统的驱动信号,对承片台进行驱动定位,实现精对正.最终使X,Y方向上的重复对正准确度分别达到了± 21 nm(± 3σ)和±24 nm(± 3σ).